Access Serial Host Console Using The Oracle Ilom Cli; Troubleshooting The Service Processor Connection - Sun Microsystems Server X4-2 Installation Manual

Remote CD/DVD Image – Select CD-ROM Image to redirect the server to the
■
ISO image file located on the remote system.
Note – Using either of the CD/DVD options to install software on your server might
significantly increase the time necessary to perform the installation because the
content is accessed over the network. The installation duration depends on the
network connectivity and traffic.
▼ Access Serial Host Console Using the Oracle
ILOM CLI
1. Log in to the server Oracle ILOM using an account with Administrator
privileges.
Use one of the following methods:
Use the serial management port as described in
■
a Local Serial Connection" on page
Use a client system to establish an SSH session over the network as described in
■
"Log In to Oracle ILOM Remotely Using the CLI" on page
2. To access the host serial console, type the command:
-> start /HOST/console
The serial console output appears on the screen.
Note – If the serial console is in use, stop and restart it using the stop
/HOST/console command followed by the start /HOST/console command.
3. To return to the Oracle ILOM console, press Esc followed by the "(" character
(Shift-9).
Troubleshooting the Service Processor
Connection
This section addresses two issues that might occur regarding the Oracle ILOM
service processor (SP):
The Oracle ILOM SP is hung and needs to be reset.
■
"Log In to Oracle ILOM Using
84.
Connecting to Oracle ILOM
87.
97