Sun Microsystems Server X4-2 Installation Manual page 147

From the local server, press the Power button (approximately 1 second) on the
■
front panel of the server to power off the server, then press the Power button
again to power on the server.
From the Oracle ILOM web interface, select Host Management > Power
■
Control, then select Reset from the Select Action list box.
From the Oracle ILOM CLI, type: reset /System
■
2. During the boot process, the BIOS initialization banner lists information about
the discovered SAS adapters and devices that are attached to the discovered
HBAs in the system.
3. Upon seeing the prompt Press Ctrl-C to start LSI Corp
Configuration Utility..., immediately press Ctrl+C to access the LSI
Corp Config Utility.
The LSI Corp Config Utility menu appears.
4. Use the LSI Corp Config Utility to configure RAID on the server.
For instructions on how to use the BIOS configuration utilities to configure RAID
in Legacy BIOS Boot Mode, refer to instructions for creating a bootable drive on
x86/64 systems in the Sun Storage 6 Gb SAS PCIe HBA, Internal Installation Guide
For HBA Models SGX-SAS6-INT-Z and SG-SAS6-INT-Z at:
http://docs.oracle.com/cd/E19337-01/index.html
Configuring Server Drives for OS Installation 133