Table of Contents
Advertisement
4. Use the up and down arrow keys to navigate to the LSI SAS2 MPT Controller
menu option, then press Enter.
The LSI SAS MPT Controller menu appears.
Note – The LSI SAS MPT Controller menu will vary depending the configuration of
the server.
5. Use the BIOS configuration utility to configure RAID on the server.
For instructions on how to use the BIOS configuration utilities to configure RAID
in UEFI BIOS Boot Mode, refer to instructions for creating a bootable drive on
x86/64 systems in the Sun Storage 6 Gb SAS PCIe HBA, Internal Installation Guide
For HBA Models SGX-SAS6-INT-Z and SG-SAS6-INT-Z at
http://docs.oracle.com/cd/E19337-01/index.html.
▼ Configure RAID in Legacy BIOS Boot Mode With the
Sun Storage 6 Gb SAS PCIe Internal HBA
1. Power on or reset the server.
For example, to reset the server:
132
Sun Server X4-2 Installation Guide • February 2014
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Server X4-2 and is the answer not in the manual?
Questions and answers