Oracle Ilom Hardware And Interfaces; Network Defaults - Sun Microsystems Server X4-2 Installation Manual

Table of Contents

Advertisement

Oracle ILOM Hardware and Interfaces

The following table lists the components and functions of Oracle ILOM. For complete
information about Oracle ILOM, refer to the Oracle Integrated Lights Out Manager
(ILOM) 3.1 Documentation Library at
http://www.oracle.com/goto/ILOM/docs.
Component
Function
Hardware
• Embedded service processor (SP) chipset that monitors the status and configuration of
• Two rear panel external connections: NET MGT port Ethernet connection and SER
Interfaces
• Web browser interface
• SSH command-line interface (CLI)
• IPMI v2.0 CLI
• SNMP v3 interface
With Oracle ILOM, you can monitor and manage the server components. Oracle
ILOM lets you perform the following tasks:
Configure network information
View and edit hardware configurations for the SP
Monitor vital system information and view logged events
Manage Oracle ILOM user accounts
Related Information
Oracle Integrated Lights Out Manager (ILOM) 3.1 Documentation Library at:
http://www.oracle.com/goto/ILOM/docs

Network Defaults

The Sun Server X4-2 supports dual-stack IPv4 and IPv6 settings, which enable Oracle
ILOM to fully operate in an IPv4 and IPv6 network environment. For IPv4
configurations, DHCP is enabled by default, allowing a DHCP server on the network
to automatically assign network settings to the server. For IPv6 configurations, IPv6
82
Sun Server X4-2 Installation Guide • February 2014
components such as fans, storage drives, and power supplies.
MGT RJ-45 serial management port.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Server X4-2 and is the answer not in the manual?

Table of Contents