Sun Microsystems Sun Fire X4150 Getting Started Manual

Sun Fire
™
X4450 Servers

Getting Started Guide

This guide describes the minimum steps you must perform to power on and boot your server for the first time.
Detailed installation information can be found in the Installation Guide for each server, which is available at the
Sun product documentation web site. Refer to the section
document for a list of documentation for your system and location of the documentation.
Contents
TM
The Sun Fire X4150, X4250, and X4450 servers are shipped with the components that you ordered for your
configuration. Optional components or rack installation hardware might be packaged and shipped separately.
Documentation and Media Kit
The Documentation and Media Kit is an orderable option for your server. It contains installation documentation,
the Tools and Drivers CD/DVD, the Sun Installation Assistant CD/DVD, and the SunVTS CD/DVD. You can
order additional media kits at any time, using the following marketing part numbers: Sun Fire X4150: X6438A;
Sun Fire X4250: X6369A; and Sun Fire X4450: X6439A.

Safety and Compliance Information

Before performing an installation, refer to the following documents for safety information:
Important Safety Information for Sun Hardware Systems – Printed document included in the ship kit.
■
Safety and Compliance Guide - Available on the product documentation site.
■

▼ Install Optional Components

Before installing the server into the rack, you must first install any optional components that you ordered with
the server, such as DIMMs, PCIe cards, and so on. Refer the Service Manual for your server for instructions on
about installing optional components.
▼ Mount the Server in a Rack
For rackmounting instructions, refer to the instructions included with the rail kit, the service label on the server,
and the server Installation Guide.
X4150, X4250 and
"Documentation for This Product"
1
at the end of this