Sun Microsystems Server X4-2 Installation Manual page 182

1. If you are not already logged in to Oracle ILOM, log in locally from a serial
connection or remotely using an Ethernet connection.
See
2. Power on or restart the server, as follows:
■
■
The server begins the boot process.
3. Start the host console using one of the following methods.
■
■
168 Sun Server X4-2 Installation Guide • February 2014
"Connecting to Oracle ILOM" on page
To power on the server, use one of the following methods:
From the Oracle ILOM web interface System Information page, click Host
■
Management > Power Control, and in the Select Action list box, click Power
On.
From the Oracle ILOM CLI, type:
■
-> start /System
When prompted, enter y to confirm:
Are you sure you want to start /System (y/n)? y
Starting /System
To restart the server, use one of the following methods:
From the Oracle ILOM web interface, click Host Management > Power
■
Control, and in the Select Action list box, click Reset.
From the Oracle ILOM CLI, type:
■
-> reset /System
When prompted, enter y to confirm:
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System
From the Oracle ILOM web interface, click Remote Control > Launch Remote
Console.
From the Oracle ILOM CLI, type:
-> start /HOST/console
When prompted, type y to confirm:
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
After the server boots, the GRUB menu appears.
81.