Rackmount Kit Contents - Sun Microsystems Server X4-2 Installation Manual

Caution – Reduced airflow: Installation of the equipment in a rack should be such
that the amount of airflow required for safe operation of the equipment is not
compromised.
Caution – Mechanical loading: Mounting of the equipment in the rack should be
such that a hazardous condition is not created due to uneven mechanical loading.
Caution – Circuit overloading: Consideration should be given to the connection of
the equipment to the supply circuit and the effect that overloading of the circuits
might have on over-current protection and supply wiring. Appropriate consideration
of equipment nameplate power ratings should be used when addressing this
concern.
Caution – Reliable earthing: Reliable earthing of rackmounted equipment should
be maintained. Particular attention should be given to supply connections other than
direct connections to the branch circuit (for example, use of power strips).
Caution – Slide-rail-mounted equipment is not to be used as a shelf or a work space.
Related Information
"ESD and Safety Precautions" on page 17
■

Rackmount Kit Contents

The rackmount kit contains two slide-rails, two mounting brackets, and optional
securing screws.
Note – Refer to the rackmount kit installation card for instructions on how to install
your server into a four-post rack, using the slide-rail and cable management arm
options.
42 Sun Server X4-2 Installation Guide • February 2014