Log In To Oracle Ilom Using A Local Serial Connection; Logging In To Oracle Ilom Using A Remote Ethernet Connection - Sun Microsystems Server X4-2 Installation Manual

▼ Log In to Oracle ILOM Using a Local Serial
Connection
This procedure does not require that you know the IP address of the sever SP. It does
require that you have an Oracle ILOM Administrator account. You must be present at
the server to perform this procedure.
Note – To enable first-time login and access to Oracle ILOM, a default Administrator
account and its password are provided with the system. To build a secure
environment, you must change the default password (changeme) for the default
Administrator account (root) after your initial login to Oracle ILOM. If this default
Administrator account has since been changed, contact your system administrator for
an Oracle ILOM user account with Administrator privileges.
1. To ensure that your server has the necessary connections for local access to
Oracle ILOM, follow the instructions in
on page
2. To establish a connection between your serial console and Oracle ILOM, press
Enter on the terminal.
A login prompt to Oracle ILOM appears.
3. Log in to the Oracle ILOM command-line interface (CLI) using an
Administrator account.
Oracle ILOM displays a default command prompt (->), indicating that you have
successfully logged in to Oracle ILOM.
Related Information
"Log In to Oracle ILOM Remotely Using the Web Interface" on page 85
■
"Log In to Oracle ILOM Remotely Using the CLI" on page 87
■
Logging In to Oracle ILOM Using a
Remote Ethernet Connection
To log in to Oracle ILOM remotely using either the command-line interface (CLI) or
the web interface, you must know the IP address of the server SP. The following
sections describe how you can determine the IP address (if you do not know it), how
to log in to Oracle ILOM, and how to view and modify the SP IP address:
84 Sun Server X4-2 Installation Guide • February 2014
78.
"Attaching Data Cables to the Server"