Sun Microsystems Server X4-2 Installation Manual page 88

FIGURE:
b. Continue pushing the server into the rack until the slide-rail locks (on the
6. Adjust the cable straps and the CMA, as required.
Related Information
"Install the Server Into the Slide-Rail Assemblies" on page 50
■
"Install the Second-Generation Cable Management Arm" on page 52
■
"Install the First-Generation Cable Management Arm" on page 68
■
74 Sun Server X4-2 Installation Guide • February 2014
Location of Slide-Rail Release Tabs
front of the server) engage the slide-rail assemblies.
You will hear an audible click when the server is in the normal rack position.