Installing The Server In A Rack; To Install The Mounting Brackets; Figure 2-1 Unlocking The Slide Rail Assembly - Sun Microsystems fire t1000 Installation Manual

Installing the Server in a Rack

▼

To Install the Mounting Brackets

1. Pull both mounting brackets completely out of their respective slide rails.
a. Simultaneously press and hold the upper and lower lock buttons of the slide
rail lock (
FIGURE 2-1
b. Pull the mounting bracket out until it stops.
c. Slide the mounting bracket release button to the left (
mounting bracket completely out of the slide rail.
12 Sun Fire T1000 Server Installation Guide • July 2006
).
FIGURE 2-1
Unlocking the Slide Rail Assembly
), then slide the
FIGURE 2-2