Volkswagen Golf Variant 2007 Workshop Manual page 235

1.2.2 Installing
– Drive in new seal to stop, being careful not to cant seal.
– Half-fill space between sealing lip and dust lip with sealing
grease -G 052 128 A1- .
– Secure flange shaft -A- using countersunk bolt and tighten to
specified torque ⇒ Item 10 (page 235)
– Attach right drive shaft to gearbox flange shaft -A- ⇒ Running
gear, axles, steering; Rep. gr. 40 ; Repairing drive shaft; Re‐
moving and installing drive shafts .
– Install drive shaft heat shield, if present, on engine. Tighten
bolts -arrows- to specified torque ⇒ Running gear, axles,
steering; Rep. gr. 40 ; Repairing drive shafts .
– Check gear oil ⇒ page 126
– Install noise insulation ⇒ General body repairs, exterior; Rep.
gr. 50 ; Noise insulation .
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
.
.
6-speed manual gearbox 02Q - Edition 06.2010
1. Renewing flange shaft oil seals with gearbox installed
231