Assembly Overview - Hydraulics (Lhd) - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
2.8

Assembly overview - hydraulics (LHD)

1 - Brake fluid reservoir
2 - Spring-type clip
❑ Not fitted in all vehicles
3 - Supply hose
❑ Rubber
❑ From 12 05, plastic
⇒ page 35
4 - Master cylinder
❑ Removing and installing
⇒ page 29
5 - Clip
❑ Pull out clip to stop to re‐
move and install pipe/
hose line or plastic line
❑ Pulled out to side on
some master cylinders
6 - Seal / O-ring
❑ Pull onto line connection
❑ Insert with brake fluid
❑ Seals/O-rings are adap‐
ted to configuration of
line connection
⇒ page 35
❑ Allocation ⇒ Electronic
parts catalogue „ETKA"
7 - Retainer
❑ To remove and install,
separate master cylin‐
der from clutch pedal
⇒ page 19
8 - Clutch pedal
❑ Removing and installing
⇒ page 19
9 - Hexagon nut, 25 Nm
❑ Self-locking
❑ Qty. 3
❑ For mounting bracket on bulkhead
❑ Always renew
10 - Pipe/hose line
❑ Allocation ⇒ Electronic parts catalogue „ETKA"
❑ To remove, remove battery and battery tray ⇒ Electrical system; Rep. gr. 27 ; Removing and installing
battery .
❑ Removing and installing
11 - Bracket
❑ For pipe/hose line
❑ Secured to body
❑ Hidden by engine/gearbox mounting
❑ Retainer identification
34
Rep. gr.30 - Clutch
⇒ page 41
⇒ Item 10 (page 34)
⇒ page 36