Volkswagen Golf Variant 2007 Workshop Manual page 37

Note
Renew hose clips.
♦
Allocate all components according to ⇒ Electronic parts cata‐
♦
logue „ETKA" .
If the pipe/hose line was removed
– Push pipe/hose line -1- or plastic line with seal -2- onto con‐
nection of master cylinder -4- until securing clip -3- engages
audibly.
– Test pipe/hose line by tugging on it.
– After removing hose clamp up to 25 mm ∅ -3094- , return
supply hose to its original shape, if necessary.
– Bleed clutch system
Right-hand drive
– In vehicles with particle filter, install shielding -A- on particle
filter ⇒ Rep. gr. 26 ; Parts of exhaust system; Assembly over‐
view - front exhaust pipe with particle filter .
LHD
– Install battery tray and battery ⇒ Electrical system; Rep. gr.
27 ; Removing and installing battery .
– Remove complete air filter housing if it is near battery ⇒ Rep.
gr. 23 ; Repairing diesel direct injection system or ⇒ Rep. gr.
24 ; Repairing injection system .
– Reconnect battery and perform work required after connecting
battery ⇒ Electrical system; Rep. gr. 27 ; Disconnecting and
connecting battery .
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
⇒ page 37 .
6-speed manual gearbox 02Q - Edition 06.2010
2. Repairing clutch mechanism
33