Volkswagen Golf Variant 2007 Workshop Manual page 67

– Pull gaiter with frame for centre console upwards, inside out
over gear knob.
– Open clamp -arrow- and pull off gear knob together with gaiter.
In some versions, the centre console frame remains in the centre
console.
– If necessary pull off, or carefully lever off, centre console
frame.
– Pull off noise insulation -1-.
1.4.2 Installing
– First set noise insulation in place.
Installation position of noise insulation
• -Arrow A- points in direction of travel.
• Catches -arrows B- must engage in centre console.
– If necessary, press frame into centre console.
– Then turn gaiter inside out.
The gear knob must be pressed to stop.
– Install gear knob with frame and gaiter and squeeze new
clamp -arrow- together.
– Then press gaiter with frame into centre console or gaiter into
frame.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
1. Repairing selector mechanism
63