Installation position of synchro-ring -A- (3rd gear inner ring)
Lugs -arrows 1- locate in notches -arrows 2- of synchro-ring -B-.
Installation position of 3rd gear synchromeshed gear
Higher shoulder -A- faces 4th gear -B-. Notches in shoulder
-arrows- engage in lugs of outer ring
– Install 3rd gear synchromeshed gear with needle bearing.
Note
Press on tapered roller bearing inner race
♦
Determine retaining ring for tapered roller bearing inner race
♦
⇒ page 194
.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
⇒ page 198
.
⇒ page 194
6-speed manual gearbox 02Q - Edition 06.2010
.
2. Output shaft for 1st through 4th gears
205