Volkswagen Golf Variant 2007 Workshop Manual page 76

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
❑ Do not interchange; cable end-pieces for gate selector cable to relay lever and gear selector cable to
gearbox selector lever are different
❑ From 05.07, fitted in conjunction with plastic relay lever
❑ Removing from plastic relay lever
❑ Pressing onto plastic relay lever
❑ Allocation ⇒ page 73
12 - Relay lever
❑ Installation position
❑ After installing, adjust selector mechanism
❑ May be made from plastic or metal
❑ Metal relay lever is mounted in bearing bush
⇒ Item 14 (page 72)
❑ From 05.07, plastic relay lever
❑ Remove and install plastic relay lever together with cable end-piece
❑ Bearing bushes and securing clip not required for plastic relay lever
13 - Bearing bush
❑ Discontinued on relay levers made from plastic
14 - Lock washer
❑ Always renew
❑ Discontinued on relay levers made from plastic
15 - Shoe
16 - Gearbox selector lever
❑ With damper weight
❑ Install so that master spline aligns with selector shaft
❑ After installing, adjust selector mechanism
❑ Installation position
❑ From 06.06, smaller diameter of support pin for cable end-piece
17 - Hexagon nut, 23 Nm
❑ Self-locking
❑ Always renew
18 - Cable end-piece
❑ For gear selector cable to gearbox selector lever
❑ After installing, adjust selector mechanism
❑ Do not interchange; cable end-pieces for gate selector cable to relay lever and gear selector cable to
gearbox selector lever are different
72
Rep. gr.34 - Controls, housing
⇒ page 73
⇒ page 75
⇒ page 75
⇒ page 74
⇒ page 74
⇒ page 73
⇒ page 75
⇒ page 82
⇒ Item 13 (page 72) and secured with securing clip
⇒ page 82
⇒ page 73
⇒ page 82
⇒ page 75