Volkswagen Golf Variant 2007 Workshop Manual page 99

Pin -B- must lie flush with guide from gearbox support -3282- at
bottom -arrow-.
Engine/gearbox connecting bolt -arrow- has been removed.
– Remove connecting bolt for engine/gearbox -C- as well as
lower connecting bolts for engine/gearbox.
– Press gearbox away from engine, off dowel sleeves.
– Tilt gearbox in area of differential using spindles of gearbox
support -3282- .
• Differential must face upwards.
Right flange shaft -1- must be guided past bolt hole of engine
-2-.
– Guide gearbox with differential -A- over subframe and swing
out.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
2. Removing and installing gearbox in vehicles with turbo diesel engine
6-speed manual gearbox 02Q - Edition 06.2010
95