Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
Pulling needle bearing out of clutch housing
A - Counter support , e.g. -Kukko 22/2-
B - Internal puller, 23.5 ... 30 mm , e.g. -Kukko 21/4-
Note
The needle bearing is destroyed during removal and must be re‐
newed.
Pressing needle bearing -A- into clutch housing
– Before pressing in, lay reverse shaft thrust washer -B- on nee‐
dle bearing.
Removing input shaft oil seal
Note
When gearbox is removed, oil seal can be removed with drift.
Driving in input shaft oil seal flush
170
Rep. gr.34 - Controls, housing