Volkswagen Golf Variant 2007 Workshop Manual page 118

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
– Remove bracket -1- from gearbox -arrows-.
– Remove relay lever together with cable end-piece
⇒ page 75 .
– Remove gearbox selector lever from selector shaft.
– Remove engine/gearbox connecting bolt -1-.
Note
Loosen engine/gearbox connecting bolts -2- and leave them in‐
stalled just hand-tight.
– Attach bracket -T10346- with bolt -1- to left threaded hole in
subframe.
– In the process, position bracket -T10346- at the same angle
as the engine.
-1- = Flange bolt M6 x 20.
– Secure engine support -3300 A- to bracket -T10346- .
– Press engine forwards using spindle of engine support -3300
A- . In the process, observe the following points in particular:
• The air conditioning compressor -2- must not contact -arrow-
the refrigerant line -1-.
• The alternator must not contact the refrigerant line.
• The pressure pipe must not contact the radiator.
To remove gearbox „02Q", set up gearbox support -3282- with
adjustment plate -3282/33- .
– Insert gearbox support -3282- in engine and gearbox jack -
V.A.G 1383 A- .
– Align arms of gearbox support according to holes in adjust‐
ment plate .
114
Rep. gr.34 - Controls, housing