– Lower gearbox about 40 mm, dimension -a-, by adjusting spin‐
dles attached to engine.
Note
Observe connecting lines, hoses and radiator when moving en‐
gine/gearbox assembly.
– Remove bracket -1- from gearbox -arrows-.
– Remove relay lever together with cable end-piece
⇒ page 75
.
– Remove gearbox selector lever from selector shaft.
– If small cover plate -A- for flywheel is present, remove it
-arrows-.
– Remove lower engine/gearbox connecting bolt -1-.
Note
Loosen engine/gearbox connecting bolt -3- and leave it installed
just hand-tight.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
2. Removing and installing gearbox in vehicles with turbo diesel engine
6-speed manual gearbox 02Q - Edition 06.2010
93