Volkswagen Golf Variant 2007 Workshop Manual page 107

– Attach earth strap -1- to upper starter bolt.
– Push connector -2- onto reversing light switch -F4- .
– Gearboxes for vehicles with start-stop system: join connector
-arrow- to gearbox neutral position sender -G701- .
– Push pipe/hose line or plastic line -A- to stop into slave cylinder
breather and press down clip -arrow-.
– Test line by tugging on it.
– Remove hose clamp -3094- from supply hose.
– After removing hose clamp -3094- , return supply hose to its
original shape, if necessary.
– Bleed clutch system
– Check for correct installation position of vacuum hose for
brake system, install vacuum hose if necessary ⇒ Rep. gr.
47 .
– Bolt selector cable support brackets to gearbox and tighten
bolts and nuts -arrows- to specified torque
⇒ Item 6 (page 71) and
– Insert gate selector cable in cable end-piece.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
⇒ page 37 .
⇒ Item 10 (page 71)
2. Removing and installing gearbox in vehicles with turbo diesel engine
6-speed manual gearbox 02Q - Edition 06.2010
.
103