Volkswagen Golf Variant 2007 Workshop Manual page 178

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
Metal relay lever
– Pull off securing clip -2- and press relay lever -3- to side out of
mounting.
Note
If relay lever cannot be removed due to gearbox bracket, remove
gate selector cable from relay lever. Guide shoe out of gearbox
selector lever.
Plastic relay lever
– Remove relay lever together with cable end-piece
⇒ page 75 .
Continued for all selector mechanisms
– Remove nuts -4- and remove gearbox selector lever -1-.
– Lever out seal using oil seal extractor lever -T20143/1- .
– Lightly oil outer circumference of new oil seal.
– Fill space between sealing lip and dust lip -arrow- with sealing
grease -G 052 128 A1- .
– Drive in seal using thrust piece -VW 423- .
Carry out further installation in the reverse sequence noting the
following points:
– Install gearbox selector lever on selector shaft of gearbox and
tighten hexagon nut to specified torque
Note
The gearbox selector lever can be installed in only one position.
– Adjust selector mechanism
– If removed, install complete air filter housing ⇒ Rep. gr. 23 ;
Repairing diesel direct injection system or ⇒ Rep. gr. 24 ;
Repairing injection system .
174
Rep. gr.34 - Controls, housing
⇒ Item 1 (page 172)
⇒ page 82 .
.