Volkswagen Golf Variant 2007 Workshop Manual page 91

♦ Bracket -T10346-
♦ Engine support -3300 A-
♦ Adapter -VW 771/40-
♦ Hose clamps to 25 mm
-3094-
♦ Grease for clutch plate
splines -G 000 100-
♦ Allocate grease using ⇒
Electronic parts catalogue
(ETKA) .
♦ Flange bolt M6 X 20
♦ Flange bolt M6 X 80
♦ Hexagon head bolt M10 x
20
At a later point, support bracket -10-222 A- will be put onto lon‐
gitudinal members with adapters -10 - 222 A /8- .
• To prevent damage to edges of wings, cover bottom area of
both adapters -10 - 222 A /8- with self-adhesive fabric tape
-arrow- ⇒ Electronic parts catalogue (ETKA chemical sub‐
stances) .
Removing
– Check whether a coded radio is fitted. If so, obtain anti-theft
code.
– With ignition switched off, disconnect battery earth strap ⇒
Electrical system; Rep. gr. 27 ; Disconnecting and connecting
battery .
At a later point, the support bracket -10-222 A- will be connected
to the lifting eyes of engine.
– If engine cover blocks access, remove engine cover.
– Remove complete air filter housing if it is located close to the
battery ⇒ Rep. gr. 23 ; Repairing diesel direct injection sys‐
tem .
– Remove battery, battery cover and battery tray ⇒ Electrical
system; Rep. gr. 27 ; Removing and installing battery .
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
2. Removing and installing gearbox in vehicles with turbo diesel engine
6-speed manual gearbox 02Q - Edition 06.2010
87