Volkswagen Golf Variant 2007 Workshop Manual page 154

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
– Remove retaining ring -A- for input shaft sealing cover.
– Pierce rubber in centre of cover -C- with a screwdriver .
– Pull sealing cover out of gearbox housing.
A - Counter support , e.g. -Kukko 22/1-
B - Internal puller, 8 ... 12 mm , e.g. -Kukko 21/01-
Remove retaining ring -C- from deep groove ball bearing of input
shaft in gearbox housing as follows:
– Hold one end of retaining ring with screwdriver -A-.
– Using a screwdriver , -B-, lever other end out of groove in deep
groove ball bearing -direction of arrow-.
– Using screwdriver -B-, lever out securing ring further.
– Remove securing bolts -A- for gearbox housing to clutch hous‐
ing.
150
Rep. gr.34 - Controls, housing