Adjusting Selector Mechanism - Volkswagen Golf Variant 2007 Workshop Manual

Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
– Secure gear selector cable and gate selector cable to selector
housing using securing clips -2 and 3-.
– Press gear selector cable onto gear lever and gate selector
cable onto gate selector lever in selector housing and secure
with clips -1 and 4-
Note
Securing clips -1 and 4- have been discontinued on selector
mechanisms from 11.06.
– Fit seal and secure selector mechanism cover by pressing
down tabs -arrows-.
– Install selector mechanism
– Adjust selector mechanism
1.11

Adjusting selector mechanism

Locking pin -T10027 A-
Note
The following points are essential to ensure correct adjust‐
♦
ment of selector mechanism:
Moving parts of selector mechanism and elements transferring
♦
force must be in proper condition.
Selector mechanism must move freely.
♦
Gearbox, clutch and clutch mechanism must also be in proper
♦
condition.
• Gearbox must be in neutral.
– Remove complete air filter housing if bracket -A- to secure
gear selector cable and gate selector cable are not accessible
⇒ Rep. gr. 23 ; Repairing diesel direct injection system or ⇒
Rep. gr. 24 ; Repairing injection system .
82
Rep. gr.34 - Controls, housing
⇒ page 79 .
⇒ page 82 .