Volkswagen Golf Variant 2007 Workshop Manual page 197

Press on tapered roller bearing inner race on side facing clutch
housing
Pulling tapered roller bearing outer race out of clutch housing
A - Counter support , e.g. -Kukko 22/2-
B - Internal puller, 56 ... 70 mm , e.g. -Kukko 21/8-
Pressing tapered roller bearing outer race into clutch housing
– Support clutch housing with drift sleeve -40-20- directly below
bearing support.
Pull off tapered roller bearing inner race on side facing gearbox
housing
Before setting up tapered roller bearing puller :
– Remove retaining ring for tapered roller bearing inner race on
side facing clutch housing.
– Insert press tool -VW 431- into output shaft and place thrust
plate -40-105- on that.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
6-speed manual gearbox 02Q - Edition 06.2010
2. Output shaft for 1st through 4th gears
193