Renewing Seal For Right Flange Shaft - Volkswagen Golf Variant 2007 Workshop Manual

1.1.2 Installing
– Drive in new seal to stop, being careful not to cant seal.
– Half-fill space between sealing lip and dust lip with sealing
grease -G 052 128 A1- .
– Insert flange shaft.
– Secure flange shaft using countersunk bolt and tighten to
specified torque ⇒ Item 10 (page 235)
– Install left drive shaft ⇒ Running gear, axles, steering; Rep.
gr. 40 ; Repairing drive shafts; Removing and installing drive
shafts .
– Install lower part of front left wheel housing liner ⇒ General
body repairs, exterior; Rep. gr. 66 ; Wheel housing liner .
– Install wheel ⇒ Running gear, axles, steering; Rep. gr. 44 ;
Torque settings for mounting wheels .
– Check gear oil ⇒ page 126
– Install noise insulation ⇒ General body repairs, exterior; Rep.
gr. 50 ; Noise insulation .
1.2

Renewing seal for right flange shaft

Special tools and workshop equipment required
♦ Thrust piece -3305-
♦ Torque wrench -V.A.G 1331-
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤ , Jetta 2011 ➤
.
.
6-speed manual gearbox 02Q - Edition 06.2010
1. Renewing flange shaft oil seals with gearbox installed
229