View and Modify
Projector Settings
Use the procedures in this section to modify projector settings including the touch panel controller,
TPC screen brightness, and time settings.
Set projector and TPC preferences
You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Preferences.
2. Adjust these settings:
Field
Temperature Units
Image Orientation
Beep on Screen Press
Enable Screen Saver/Screen
Saver Delay
Over Temperature/Fan Failure
Brightness
Calibrate Screen
Adjust projector time settings
You need Administrator or Service permissions to complete this procedure.
1. Tap Menu > Administrator Setup > Time Setup.
2. Adjust these settings:
Field
Time Zone
CP42LH User Guide
020-101363-03 Rev. 1 (08-2016)
Description
Display temperature information in Celsius or Fahrenheit.
The direction of the on screen image.
When selected, a sound plays when you tap the TPC screen.
Enables a screen saver and determines the frequency that the screen
saver appears.
Opens an alarm window when a pre-defined event occurs.
Adjusts the brightness of the touch screen display.
Opens the Calibrate window and starts the TPC calibration.
Description
The time zone where the projector is installed.
47