Firmware
Use this chapter for firmware upgrade process.
System firmware upgrade
The firmware upgrade procedure for D13WU-HS is the same as D13HD-HS. D13HD-HS is used as the
example.
ID
Equipment needed
1
Software
2
Hardware
Updating the Windows setting
To update the firmware on your projector, you must first set up your PC.
To update the windows settings on your PC, complete the following steps.
1. Close all firewalls.
2. Set the HDD sleep timer to greater than two hours.
HS Series D13 Service Manual
020-000892-03 Rev. 1 (12-2019)
OPFU: One package firmware upgrade
• Projector
• Power cord, provided with the projector and appropriately rated for you region
• RJ45 cable (CAT-5e)
• PC or laptop with Windows XP, Windows 7, Windows 8, and Windows 10, 32 or 64-bit.
41