– Carefully prise trim over locking hooks -4- away from turn sig‐
nal -arrow b-.
– Release locking hooks -3- from mirror base carrier -arrow c-
using a screwdriver.
– Pull off trim -1-.
2.5.2
Installing
Installation is carried out in the reverse order of removal.
•
Finally check function.
2.6
Removing and installing side turn signal
and entry light in exterior mirror
Note
The removal and installation sequence is only for the left turn
♦
signal repeater. The removal and installation of the right turn
signal repeater is similar.
The turn signal repeaters are fitted with long-life light-emitting
♦
diodes (LEDs) instead of conventional bulbs.
Therefore, changing bulbs is not necessary. In case of dam‐
♦
age, the entire turn signal must be renewed.
2.6.1
Removing
Note
The lower part of the housing and the turn signal repeater are one component.
Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
389
2. Exterior mirror