Dell Networking 2024 Reference Manual page 115

Command
match source-address mac
match srcip
match srcip6
match srcl4port
match vlan
mirror
police-simple
police-single-rate
police-two-rate
policy-map
random-detect queue-
parms
random-detect exponential-
weighting-constant
Description
Adds to the specified class definition a match
condition based on the source MAC address of
the packet.
Adds to the specified class definition a match
condition based on the source IP address of a
packet.
Adds to the specified class definition a match
condition based on the source IPv6 address of a
packet.
Adds to the specified class definition a match
condition based on the source layer 4 port of a
packet using a single keyword, a numeric
notation, or a numeric range notation.
Adds to the specified class definition a match
condition based on the value of the layer 2
VLAN Identifier field.
Mirrors all the data that matches the class
defined to the destination port specified.
Implements simple color aware marking for the
specified class.
Implements a single-rate Three Color
Marker (trTCM) per RFC 2698
Implements a two-rate Three Color
Marker (trTCM) per RFC 2698.
Establishes a new DiffServ policy or enters
policy map configuration mode.
Configures the green, yellow and red TCP and
non-TCP packet minimum and maximum
thresholds and corresponding drop
probabilities on an interface or all interfaces.
Configures the decay in the calculation of the
average queue size user for WRED on an
interface or all interfaces.
Command Groups
a
Mode
CMC
CMC
v6CMC
CMC
CMC
PCMC
PCMC
PCMC
PCMC
GC
GC, IC,
or IR
GC, IC,
or IR
115