Defining Enable Password; Line Password Cli Commands - Dell PowerConnect 5316M User Manual

2
Define the Secure Telnet Line Password field.
3
Click Apply Changes.
The line password for Secure Telnet sessions is defined, and the switch module is updated.
Assigning Line Passwords Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
Line Password page.
Table 6-35. Line Password CLI Commands
CLI Command
password password
[encrypted]
The following is an example of the CLI commands:
console(config-line)# password dell

Defining Enable Password

The Enable Password page sets a local password to control access to Normal, Privilege, and Global
Configuration. To open the Enable Password page, click System → Management Security →
Enable Passwords in the tree view.
Description
Specifies a password on a line.
Configuring System Information
139