Concluding Steps - Fujitsu Server PRIMERGY TX1330 M1 Upgrade And Maintenance Manual

Figure 174: Securing the TPM
Ê Secure the TPM with the TPM screw using the TPM bit insert.
I
Do not fasten the screw too firmly. Stop as soon as the head of the
screw lightly touches the TPM.

14.4.1.3 Concluding steps

"Reassembling" on page 58
Ê
"Connecting the server to the mains" on page 67
Ê
"Switching on the server" on page 68
Ê
Ê Enable TPM in the system board BIOS. Proceed as follows:
Ê Switch on or restart your server.
Ê As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
Ê Select the Advanced menu.
Ê Select the Trusted Computing submenu.
Ê Set the TPM Support and TPM State settings to Enabled.
Ê Under Pending TPM operation, select the desired TPM operation mode.
Ê Save your changes and exit the BIOS.
I
For more information on how to access the BIOS and modify settings,
refer to the corresponding BIOS Setup Utility reference manual.
"Enabling BitLocker functionality" on page 90
Ê
TX1330 M1
Upgrade and Maintenance Manual
System board and components
267