Removing The Standard Power Supply Unit; Installing The Upgrade Kit - Fujitsu Server PRIMERGY TX1330 M1 Upgrade And Maintenance Manual

6.4.2

Removing the standard power supply unit

Ê Remove the standard power supply unit as described in section
the defective standard power supply unit" on page
6.4.3

Installing the upgrade kit

Figure 40: Installing the PSU cage
Ê Insert the PSU cage into the chassis (1).
Ê Slide the new PSU cage towards the rear of the chassis (2).
Ê Secure the PSU cage with one screw (3).
Ê Connect the two power cables to the power distribution board (see figure
38).
TX1330 M1
Upgrade and Maintenance Manual
Power supply
"Removing
101.
117