Table of Contents
Advertisement
Pos. Indicator
I
The meaning of further buttons is described in the corresponding
operating manual.
Symbol
12
13
NMI
14
RST
15
ID
TX1330 M1
Status
Description
Power on delay
I
yellow on
Button
Function
This button is used to switch the server on or
off.
I
On / Off
button
This button is used to troubleshoot software
and device driver errors It can be pressed
using the end of a paper clip.
V
NMI button
This button is used to reboot the system. It
can be pressed using the end of a paper clip.
Reset button
V
This button highlights the ID indicator on the
ID button
front and I/O panels for easy server
identification.
Upgrade and Maintenance Manual
After shutting down, the server
cannot be switched on again right
away. If the On / Off button is
pressed right after shutting down the
server, the power-on indicator will
light up yellow until the delay period
ends and the server will boot.
If the system is running an ACPI-
compliant operating system, the
pressing the On / Off button will
performs a graceful shutdown.
CAUTION!
Use this button only if directed to do so
by qualified certified maintenance
personnel!
CAUTION!
Risk of data loss!
Appendix
331
Advertisement
Table of Contents
