10
Main memory
Safety notes
V
CAUTION!
Do not install unsupported third party memory modules. For further
●
information on supported memory modules, refer to section
information" on page
Memory modules remain hot after shutdown. Wait for components to
●
cool down before installing or removing memory modules to prevent
burns.
Do not insert and remove memory modules repeatedly. Doing so may
●
cause failures.
Pressing out the securing clips on the memory module connector will
●
eject the installed memory module. To prevent damage and injuries
eject memory modules carefully without applying excessive force.
For further information, please refer to chapter
●
information" on page
10.1
Basic information
– The system board is equipped with four memory slots.
– The system has to be equipped with at least one memory module.
– Supported memory modules:
DDR3L 1333 or 1600 unbuffered single rank (SR) or dual rank (DR)
UDIMMs with ECC
– Supported capacities: 2 GB, 4 GB or 8 GB.
– Maximum amount of RAM: 32 GB
TX1330 M1
209.
31.
Upgrade and Maintenance Manual
"Basic
"Important
209