Handling Sfp+ Transceiver Modules; Installing Sfp+ Transceiver Modules - Fujitsu Server PRIMERGY TX1330 M1 Upgrade And Maintenance Manual

9.3

Handling SFP+ transceiver modules

For Fiber Channel over Ethernet (FCoE) configurations, the Ethernet server
adapter is equipped with one or two SFP+ (small form-factor pluggable)
transceiver modules.
9.3.1

Installing SFP+ transceiver modules

Upgrade and Repair Unit
(URU)
Tools: tool-less
Preparing the SFP+ transceiver module
Figure 88: Removing the protective optical port plug
Ê Remove the SFP+ transceiver module from its protective packaging.
Ê Remove the optical port plug from the new / additional SFP+ transceiver
module.
V
CAUTION!
– Always keep the protective port plugs attached to the transceiver
optical bores and fiber-optic cable connectors until you are ready
to make a connection.
– Save the protective port plug for future use.
TX1330 M1
Upgrade and Maintenance Manual
Expansion cards and backup units
Hardware: 5 minutes
169