Configuring The Device To Log In To A Telnet Server As A Telnet Client - HP A5830 Series Configuration Manual

Task...
Configuring the device to log in to a Telnet server as a Telnet
client
Configuration prerequisites
Log in to the device.
By default, log in to the device through the console port without authentication, having user privilege level
3 after login. For information about logging in to the device with the default configuration, see
"Configuration
c. Define a
shortcut key
for termin-
ating tasks.
d. Configure
the type of
terminal
display.
e. Set the
maximum
number of
lines on the
next screen.
f. Set the size
of history
command
buffer.
Set the idle-
g.
timeout timer.
h. Specify a
command to
be auto-
matically
executed
when a user
logs in to the
current user
interface.
requirements."
Command...
escape-key { default |
character }
terminal type { ansi |
vt100 }
screen-length screen-
length
history-command max-
size value
idle-timeout minutes
[ seconds ]
auto-execute command
command
43
Remarks
Optional.
By default, press Ctrl+C to terminate a task.
Optional.
By default, the terminal display type is ANSI.
Optional.
By default, the next screen displays 24 lines.
A value of 0 disables the function.
Optional.
By default, the buffer saves 10 history
commands.
Optional.
The default idle-timeout is 10 minutes for all
user interfaces.
The system automatically terminates the user's
connection if there is no information interaction
between the device and the user in timeout
time.
Setting idle-timeout to 0 disables the timer.
Optional.
By default, command auto-execution is
disabled.
The system automatically executes the specified
command when a user logs in to the user
interface, and ends the user connection after
the command is executed. If the command
triggers another task, the system does not end
the user connection until the task is completed.
A Telnet command is usually specified to
enable the user to automatically Telnet to the
specified device.