Counting Mailpieces; Adding Graphics, Return Addresses, Messages, And Inscriptions To Your Mail - Pitney Bowes Connect+ 500W-3000 User Manual

Running mail

Counting mailpieces

You can count how many pieces of mail you run:
1. From the Run Mail screen, select the counter button at the bottom of the screen. The button is
labeled either as Resettable counter, or Total pieces depending on the job type.
Postal jobs:
l
Total Pieces - the total number of mailpieces and the postage amount for the current
o
job.
o Resettable counter - the total number of pieces run and the total postage amount since
you reset the counter.
Seal only jobs:
l
Total Pieces - total number of seal only pieces.
o
Resettable counter - the total number of seal only pieces run since you reset the
o
counter.
Non-postal jobs:
l
Total Pieces - total number of non-postal only pieces.
o
Resettable counter - the total number of non-postal only pieces run since you reset the
o
counter.
2. Select the Reset to Zero button to reset the resettable counter (or clear the batch count).
Adding graphics, return addresses, messages, and
inscriptions to your mail
You can add customised Graphic Ads, Text Messages, Return Addresses and inscriptions (if available
in your country) onto envelopes or tapes. By adding marketing, advertising, and other promotional
messages, you can now design an outer envelope that reinforces the internal message.
You place these images in the Transpromotional zone (1) on the envelope or tape.
Pitney Bowes Operator Guide April 2022 71