Enabling Qos On The Switch; Table 192. Enabling Qos On The Switch - Allied Telesis AT-8100L/8 User Manual

Chapter 100: Quality of Service (QoS)

Enabling QoS on the Switch

Command
awplus> enable
awplus# configure terminal
awplus(config)# mls qos enable
1644
By default, the QoS feature is disabled on the switch. You must enable the
QoS feature before you attempt any QoS configuration.
To enable the QoS feature on the switch, do the following:

Table 192. Enabling QoS on the Switch

Description
Enter the Privileged Executive mode from the User
Executive mode.
Enter the Global Configuration mode.
Enable the QoS feature on the switch.