Policy-Map - Allied Telesis AT-8100L/8 User Manual

AT-8100 Switch Command Line User's Guide

POLICY-MAP

Syntax
name
policy-map
Parameters
name
Specifies the name of a policy map.
Mode
Global Configuration mode
Description
Use this command to create a policy map and enter the Policy Map
Configuration mode. A policy map allows you to group class maps
together. You can assign up to five class maps to one policy map. In
addition, a policy map allows you to set actions on traffic that meet all of
the match criterion contained in the class maps. You can also assign a
policy map to a port.
Use the no form of this command, NO POLICY-MAP, to delete an existing
policy map.
Confirmation Command
"SHOW MLS QOS INTERFACE" on page 1766
Examples
This example creates a policy map called "pmap1" and enters the Policy
Map Configuration mode:
awplus> enable
awplus# configure terminal
awplus(config)# policy-map pmap1
awplus(config-pmap)#
This example deletes a policy map called "pmap5:"
awplus> enable
awplus# configure terminal
awplus(config)# no policy-map pmap5
1753