Show Mls Qos Interface Storm-Status; Table 250. Show Mls Qos Interface Storm-Status Command Description - Allied Telesis AT-8100L/8 User Manual

Chapter 103: QSP Commands

SHOW MLS QOS INTERFACE STORM-STATUS

Interface:
Storm-Protection:
Port-status:
Storm Action:
Storm Window:
Storm Downtime:
Timeout Remaining:
Last read data-rate: 0 kbps
Storm Rate:
1794
Syntax
show mls qos interface
Parameters
port
Specifies the port to display. You can view only one port at a time.
Mode
Privileged Exec mode
Description
Use this command to display the storm status for the specified port. See
Figure 281 for an example of this information.
port1.0.5
Enabled
Enabled
vlandisable
5000 ms
15 s
0 s
1000 kbps
Figure 281. SHOW MLS QOS INTERFACE STORM-STATUS Command
For an explanation of the fields in Figure 281, see Table 250.
Table 250. SHOW MLS QOS INTERFACE STORM-STATUS Command
Field
Interface
Storm-Protection
Port-status
port
storm-status
Description
Description
Lists the name of the port.
Indicates if the QSP feature is enabled or
disabled.
Indicates if the port is enabled or disabled.