Telnet Ipv6 - Allied Telesis AT-8100L/8 User Manual

TELNET IPV6

Syntax
ipv6_address
telnet ipv6
Parameters
ipv6_address
Specifies the IPv6 address of a remote device you want to manage
using the Telnet client on the switch. You can specify just one
address.
port
Specifies the protocol port number of the Telnet client. The default
value is 23.
Mode
Privileged Exec mode
Description
Use this command to start Telnet management sessions on network
devices that have IPv6 addresses. You can manage just one remote
device at a time.
Note
This command is available from local and Telnet management
sessions, but not from SSH management sessions.
Example
This example starts a Telnet management session on a network device
that has the IPv6 address 45ac:be45:78::c45:8156:
awplus> enable
awplus# telnet ipv6 45ac:be45:78::c45:8156
AT-8100 Switch Command Line User's Guide
port
[ ]
1409