Displaying Routing Information With Rip - Allied Telesis AT-8100L/8 User Manual

Chapter 106: Routing Information Protocol (RIP)

Displaying Routing Information with RIP

Codes: R - RIP, Rc - RIP connected, Rs - RIP static
C - Connected, S - Static
Network Next hop Metric
Rc 10.10.10.0/24 1 vlan10
Rc 10.10.50.0/24 1 vlan50
C 192.168.99.0/24 1 vlan1
R 192.168.20.0/24 10.10.10.32 10.10.10.3 vlan10
The R indicates that this network entry is added through RIP.
1856
To confirm that routes are dynamically added by RIP, use the SHOW IP
RIP command.
S1# show ip rip
Figure 288 is an example of the information the command displays.
From If
Figure 288. SHOW IP RIP Command
The columns in Figure 288 are defined in Table 259 on page 1892.
Time
00:00:19