Crypto Certificate Destroy - Allied Telesis AT-8100L/8 User Manual

Chapter 95: Secure HTTPS Web Browser Server Commands

CRYPTO CERTIFICATE DESTROY

1460
Syntax
crypto certificate
Parameters
id_number
Specifies the ID number of a certificate to be deleted from the
switch. The range is 0 to 10. You can enter just one ID number.
Mode
Global Configuration mode
Description
Use this command to delete unused certificates from the switch. You can
delete just one certificate at a time with this command.
Entering the WRITE or COPY RUNNING-CONFIG STARTUP-CONFIG
command after deleting a certificate is unnecessary because certificates
are not stored in the active boot configuration file.
Confirmation Command
"SHOW IP HTTPS" on page 1471
Example
This example deletes the certificate with the ID number 5:
awplus> enable
awplus# configure terminal
awplus(config)# crypto certificate 5 destroy
id_number
destroy