Allied Telesis AT-8100L/8 User Manual page 1795

Table 250. SHOW MLS QOS INTERFACE STORM-STATUS Command
Field
Storm Action
Storm Window
Storm Downtime
Timeout Remaining
Last read data-rate
Storm Rate
Confirmation Command
None
Example
This example displays the storm status for port 5:
awplus# show mls qos interface port1.0.5 storm-status
AT-8100 Switch Command Line User's Guide
Description (Continued)
Description
Indicates the action the interface takes
when triggered by the QSP feature. The
choices are portdisable (disable the port),
vlandisable (disable the VLAN), and
linkdown (shuts down the port).
Indicates the frequency that traffic is
measured to determine if storm protection is
activated. The range is from 100 to 6,000
ms.
Indicates the time, in seconds, the port is
reenabled after being disabled by the QoS
storm protection feature.The range is from 1
to 86,400 seconds.
Indicates time in seconds.
Indicates the most recent data rate in kbps.
Indicates the data rate criteria for triggering
the storm action. The range is 1 to
10,000,000 kbps .
1795