Ipv6 Access-List (Icmp) - Allied Telesis AT-8100L/8 User Manual

IPV6 ACCESS-LIST (ICMP)

Syntax
deny|permit|copy-to-mirror
action
any|host dest_ipaddress any|host time-range
Parameters
action
Specifies the action of the ACL. Here are the possible actions:
permit: Forwards all ingress packets that match the ACL.
deny: Discards all ingress packets that match the ACL.
copy-to-mirror: Copies all ingress packets that match the ACL to
the destination port of the mirror port. This action must be used
together with the port mirror feature, explained in Chapter 27,
"Port Mirror" on page 459.
src_ipaddress
Specifies the source IPv6 address of the ingress packets the
access list should filter. Choose from the following options:
any: Matches any IPv6 address.
ipaddress/mask: Matches packets that have a source IPv6
address of a subnet or an end node in the X:X::X:X/mask format.
The mask is a decimal number that represents the number of
bits in the address, from left to right, that constitute the network
portion of the address. The IP address and the mask are
separated by a slash (/); for example, 2001:odb8::a2/64.
host ipaddress: Matches packets with a source IPv6 address
and is an alternative to the IPADRESS/MASK variable for
addresses of specific end nodes. The HOST keyword indicates
that the address is of a specific end node and that no mask is
required.
dest_ipaddress
Specifies the destination IPv6 address of the ingress packets the
access list should filter. Choose from the following options:
any: Matches any IPv6 address.
AT-8100 Switch Command Line User's Guide
scr_ip_address
icmp
[vlan vid ]
1609