Table 231. Auto-QoS MED with Trust DSCP Functionality Example (Continued)
Command
awplus (config-pmap)# class
trustdscp
awplus (config-pmap-c)# trust dscp
awplus (config-if)# wrr-queue weight
3,3,1,1,12,0,0,0
awplus (config-if)# service-policy
input AutoQoS
AT-8100 Switch Command Line User's Guide
Description
Enters the "trustdscp" class map.
Enables the "trustdscp" class map to trust
DSCP ingress packets for prioritization.
Assigns a weight to the eight default DSCP
queues where weight specifies the number of
packets a port transmits from a queue before
going to the next queue. By default, the DSCP
queues start with queue 0. DSCP queues 0 and
1 are assigned a weight of 3. DSCP queues 2
and 3 are assigned a weight of 1. DSCP queue
4 is assigned a weight of 12. DSCP queues 5
through 7 are assigned a weight of 0.
Associates policy map "AutoQoS" with the given
port.
1683