Class-Map - Allied Telesis AT-8100L/8 User Manual

AT-8100 Switch Command Line User's Guide

CLASS-MAP

Syntax
name
class-map
Parameters
name
Specifies the name of a class map.
Mode
Global Configuration mode
Description
Use this command to create a class map and access the Configuration
Class Map mode.
Use the no form of this command, NO CLASS-MAP, to delete a class map.
Confirmation Command
"SHOW RUNNING-CONFIG" on page 164
Examples
To create a class map called "cmap1" and access the Configuration Class-
map mode, do the following:
awplus> enable
awplus# configure terminal
awplus(config)# class-map cmap1
awplus(config-cmap)#
To delete a class map called "cmap1," do the following:
awplus> enable
awplus# configure terminal
awplus(config)# no class-map cmap1
1701