Qos; General; Qos Properties; Figure 74: Qos > General > Qos Properties - Allied Telesis IS230-10GP Web User Manual

Chapter 2: Managing Switch

QoS

General

Item
QoS Mode
Apply
92
The QoS function allows you to configure settings for the switch QoS
interface and how the switch connects to a remote server to get services.
This section includes the following topics:
"General"

"QoS Basic Mode" on page 98

"Rate Limit" on page 99

Traditionally, networks operate on a best-effort delivery basis, all traffic
has equal priority and an equal chance of being delivered in a timely
manner. When there is congestion, all traffic has an equal chance of being
dropped.
The QoS feature can be configured for congestion-management and
congestion-avoidance to specifically manage the priority of the traffic
delivery. Implementing QoS in the network makes performance
predictable and bandwidth utilization much more effective.
The QoS implementation is based on the prioritization values in Layer 2
frames.

QoS Properties

The QoS Properties allows you to set the QoS mode.
To access this page, click QoS > General > QoS Properties.
Figure 74. QoS > General > QoS Properties
The following table describes the items in Figure 74.
Table 71. QoS Properties
Description
Select Disabled or Basic to setup the QoS function.
Click Apply to save the values and update the screen.
The QoS Global Information settings in the ensuing table are
informational only: QoS Mode.